Custom SPM vs standard machine: which should you buy?
A simple way to decide between a special purpose machine built for your part and a standard machine from a catalogue.
When a standard machine is enough
If you run many different parts in small batches, a standard pillar drill, power press or CNC machine is usually the right choice. It can be reset for each job and resold later.
When a custom SPM pays back
A custom SPM makes sense when the same component runs in high volume, when the operation needs a fixture to hold the part accurately, when operator skill is causing rejections, or when several operations can be combined into one station. Typical examples are drilling several holes in one clamping, pressing bushes and bearings to a set depth, clinching studs into sheet metal and leak testing every part.
A quick test
Multiply the parts per year by the seconds you would save per part and the rejection rate you would remove. If the saving in labour and scrap covers the machine cost within an acceptable period for your business, a custom SPM is worth quoting.
The middle path: a fixture
Sometimes a well-made fixture on an existing machine gives most of the benefit at a fraction of the cost. Welding fixtures, drill jigs and hydraulic clamping fixtures for VMCs often solve accuracy problems without a new machine.
Quick answers
Can an SPM be modified for a new part later?
Often yes, by changing the fixture and tooling, if the new part is similar in size and operation.
Is an SPM the same as a CNC machine?
No. A CNC machine is general purpose and reprogrammable. An SPM is built around one part and operation.
Related pages
More guides
Send the drawing, material and output per shift for a concept and quotation.